Rocket Manufacturer United Launch Alliance Will 3D Print Flight-Ready Rocket Components.
ULA will 3D print flight-ready components - Photo ULADo you think 3D printers are just a new fad for hobbyists or making knickknacks? Or limited to making prototypes? Don't tell that to rocket manufacturer United Launch Alliance (ULA).
Making launch vehicles for NASA, the Air Force and commercial satellites, ULA knows 3D printing is a serious tool that has been around more than 25 years and is a growing production process. And ULA knows a thing or two about critical applications. On the lower-end, its rockets cost a cool $165 million. And they must propel into space billion-dollar satellites weighing more than 60,000 pounds.
"It's about as demanding an application as you can get," says Rich Garrity, VP and General Manager Vertical Solutions Unit for Additive Manufacturing system maker Stratasys Ltd. (Nasdaq:SSYS). "Rockets must endure pressure, G-force, speed, vibration, heat, and extreme cold."
United Launch Alliance is the premier launch services company in the U.S., and with its heritage systems - Atlas and Delta - it has supported America's presence in space for more than 50 years. Like other leading edge manufacturers using 3D printing, ULA progressed from prototyping to tooling and then to flight hardware production.
After acquiring two Fortus 900mc 3D Production Systems from Stratasys, ULA began the process of updating the Environmental Control System (ECS) duct on the Atlas V, which will launch with the new 3D component in 2016. The ECS duct is critical to the countdown sequence of a launch, delivering nitrogen to sensitive electronic components within the rocket booster.
The previous design for the ECS duct assembly contained 140 parts, but by modifying the design using FDM 3D Printing Technology, ULA consolidated the number of parts to only 16. This significantly reduces installation time and results in a 57 per cent part-cost reduction. Watch the video.
ULA selected ULTEM 9085 FDM thermoplastic material to produce durable, high-performance end-use parts. "ULTEM 9085 has great strength properties over a wide temperature range," said Greg Arend, Program Manager for Additive Manufacturing at ULA. "We have done testing to show that it is very capable of withstanding temperatures from cryogenic all the way up to extreme heat. And it's tough enough to handle the vibration and stress of lift off and flight. We're very satisfied with its performance."
The Atlas V won't likely be the last launch vehicle incorporating 3D printing technology. ULA has ambitious plans to increase the quantity of 3D printed parts to over 100 on the next generation rocket.
"We see somewhat of an exponential growth in the utility of 3D printing for flight applications on our current vehicles," added Arend. "And we intend to use it heavily with our Vulcan rocket."
For more information about Stratasys, visit the website.
For more information on United Launch Alliance visit the website.
Courtesy of Bespoke Agency
You can Tweet, Like us on Facebook, Share, Google+, Pinit, print and email from the top of this article.
